SoniqWare PE-1 v1.1 VST And SG-1 v1.0 VST

SoniqWare PE-1, un período de siete bandas estéreo ecualizador paramétrico de fase lineal con analógico como plenamente de la respuesta de frecuencia de hacinamiento, editor gráfico, y de forma exclusiva los controles. SoniqWare SG-1, una puerta de ruido espectral estéreo paramétrico con el control sobre el perfil de ruido, control y resolución espectral editor gráfico.

PE-1 is a 7 bands fully parametric stereo equalizer which, besides sonic quality, possesses several unique and valuable features. First, it implements linear phase filters which totally preserve signal details and clarity, especially during transients, by avoiding the smearing usually caused by conventional non-linear phase filters. Of course, the filters in PE-1 can be selected amongst the usual shapes, including bell (peaking), band-pass, notch, (resonant) low-shelf, (resonant) high-shelf, low-cut and high-cut with different attenuation slopes, for a total of 11 filter shapes. The different bands also have unique filter shape controls allowing to tune the shape of the amplitude response of the bell filters, from usual bells to plateaus, exhibiting totally different sonic qualities and feel. This is performed individually for each equalizer band and really brings unprecedented control over the frequency response and tonal shaping of your material. Last but not least, the frequency responses are totally de-cramped, meaning that the response is not squeezed down in the HF region as it is the case on most digital equalizer implementations. This property actually simulates the behavior of professional analogue audio equalizers and results in greater sonic clarity. In the same vein, several modes are available for the Q factor dependency with filter gains, some of which mimic the feel of analogue equipment. Another smart feature, the user has access to an auto-gain function, where the master gain is adjusted according to the equalizer settings, in order to preserve the same perceived volume and minimize clipping. Further participating to the usability, the frequency response of the filters can be edited graphically using convenient handles on a large display. Finally, the interface also allows to use host automation features, as well as to store and retrieve programs. PE-1 handles all professional sample rates, up to 192 kHz.

 

Features:

• * 7 bands parametric equalizer
• * linear phase filters
• * de-cramped HF response
• * 7 filter types: bell, low-shelf, high-shelf, low-pass, high-pass, band-pass and notch
• * unique filter shape control for further tonal shaping
• * resonant shelf filters with adjustable overshoot/undershoot
• * low-pass and high-pass filter slopes: 12, 24 and 48 dB/oct
• * filter parameters: center frequency, gain, Q
• * filter center frequency control range: 20 to 20000 kHz
• * filter gain control range: -24 to 24 dB
• * accurate frequency control (1 Hz increments below 100Hz)
• * 4 modes for Q factor behavior
• * auto-gain function
• * graphical edition of response using colored handles
• * L/R vu-meter with hold peak and clip readouts
• * supported sample rates: 44.1, 48, 88.2, 96, 176.4 & 192 kHz
• * low noise, SNR: 133dB
• * stereo operation
• * master gain
• * load/save programs and banks
• * VST automation of all parameters
• * silent controls
• * sub-pixel knob rendering

 

SG-1 is a professional stereo spectral noise gate packed with high-end features that you will find very useful for most noise reduction needs, including hum, hiss, vinyl, tape, or background noise reduction. We hope that you will enjoy this product. SG-1 operates in the frequency domain using a frequency dependent noise threshold, called noise profile. When the noise profile matches the spectral content of a background noise on your material, SG-1 provides accurate noise reduction with similar behavior than other high-end noise reduction gear. Other threshold profiles may be used for creative adaptive filtering purposes. The profile can be captured from the audio signal using the capture and timeout controls. The profile can also be designed from scratch in a parametric fashion using bias, slope and parametric equalizer controls that are operated on the graphical display. Real captured profiles can also benefit from this equalizer section for fine tuning. Besides, the noise gate can be controlled accurately through several parameters, including the noise reduction amount, the gate knee, the attack and release times, and the spectral resolution. Faster dynamics and higher spectral resolution allow for very sharp action on specific noises. Slower dynamics and lower spectral resolution allow for minimal distortion of the musical/audio signal itself, and behaves closer to traditional noise gates. Default settings for those parameters will provide convincing noise reduction with minimal degradation on most material. You can at any time listen to the input or output signals, as well as to the removed noise signal. The large graphical display shows the input, profile and noise spectra in real-time. Finally, the interface also allows to store and retrieve programs. SG-1 also allows to use host automation features and handles all professional sample rates.

 

Features:

• * spectral noise gate / noise reduction
• * capture noise profile from audio data
• * noise profile parametric eq: bias, slope, one low-shelf and two bell filters
• * design noise profile from scratch
• * noise reduction control range: 0 to 48dB
• * gate knee control range: from hard to soft knee
• * attack control range: 1 to 100 ms
• * release control range: 10 to 1000 ms
• * spectral resolution control range: from single band to high spectral resolution
• * graphical display: input, profile and output signal spectra
• * graphical edition of noise profile parametric eq using colored handles
• * L/R vu-meter with hold peak and clip readouts
• * supported sample rates: 44.1, 48, 88.2, 96, 176.4 & 192 kHz
• * stereo operation
• * load/save programs and banks, including noise profiles
• * VST automation of all parameters
• * silent controls
• * use of SSE/SSE2 instructions